Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$12.00
Crank Insurance compatible with HollowGram cranks.
Features
- Protects HollowGram crank arm from rock strikes
- Reflective strip keeps riders visible
$50.00
Get the DownLow.
Our DownLow dropper post is an infinitely adjustable, easily serviceable, air/hydraulic unit with a sweet cable remote. It goes up. It goes down. You need one.
Where it thrives:
Challenging trails, up and down hills
What it's built for:
Handling, confidence
Highlights:
- 31.6 diameter
- Alloy construction with slot key bushings and wiper seals
- Preset airspring for no-fuss setup
$21.99
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6802 Bearing
$39.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
$44.99
- Clamps to a threadless steerer
- Offers up to 4-1/2" stem height increase
- Forged 6061-aluminum provides extra strength
- Machined aluminum top cap is threaded, providing easy installation
$7.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$8.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$19.99
Cannondale Headshok/Lefty Bearing
$19.99
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
$4.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks.
- M12 bolt
$12.99
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander.
- Includes cap, bolt and expander
- Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$21.99
FSA Standard Headset Bearings
$24.99
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$1.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$4.99
- Missing links to make chain installation, maintenance and reparation easier
- Reusable up to 3 times
- Compatible with 6, 7 and 8 speed IG drivetrains
- Pin width: 7.1mm
- Card of 2
$1.99
- Top lock nut for threaded headsets
- Includes water seal
- Bag of 10 Lock Nuts
$11.89
- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover
- Compatible with both twist off and crimped style bottle caps
- Bottle cap is held in place by two strong magnets
- Easy to switch out bottle caps
- AL6061 alloy cap and AL7075 alloy bolt
$11.99
• Fits 3/8" Axles
• Lightweight, compact design
• Forged aluminum construction
• Chromoly bolt
$12.79
- AL6061-T6 alloy seatpost clamp with CNC-machined cut-outs
- Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts
- 29.8mm for 27.2mm seatpost and chromoly frame
- 31.8mm for 27.2mm seatpost and aluminum frame
- 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame
- 16mm height
$14.99
Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.
$30.59
- Converts a cassette hub to a single speed
- 8 spacers included in various sizes to adjust chain line
- Available in black or red anodized 6061 aluminum
- Fits Shimano style cassette bodies
- Conical spacers for increased cog stiffness
$12.99 - $14.99
Don't let chain slap damage your frame. Install a Pro Chainstay Protector. For top protection and a custom look, it's made of heavy-duty carbon-coated neoprene. Plus, it has a Velcro closure so it's easy to put on and stays in place, and it can be removed for cleaning too.
$7.99
Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.
$17.99
The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.
$19.99 - $20.00
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
$7.99
These straps are designed to effectively attach the ATTK IC and TANK storage systems to bikes without the necessary top tube braze-ons. A rubber shroud for cable ties to prevent damage to surfaces and increase grip.
- Soft Rubber strip with a channel to house a cable tie
- Slightly grippy to help prevent slippage
- Can be cut down to fit smaller tubes
Compatibility:
The Frame Protection Strip is designed for cables ties betwen 2mm and 4mm wide. It can be used on any material, anywhere that you would normally use a cable tie.
The Kit Includes:
- 2 x 200mm long Frame Protection Strips
- 2 x 250mm x 3.6mm cable ties
Page 1 of 4
Next page