$2.40 - $5.10
• Secures frame pump to frame • Nylon • Also good for use as a watch band
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Spare mounting bracket for 2018 Air Tool frame pumps.
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
Specialized's Threaded CO2 Cartrdiges can be used with Specialized CPRO2 Trigger and Air Tool COMBO2 pump inflators.
$9.99 $14.99 33% Savings
For easy flat repairs Blackburn's Mountain Air Pump has a high-volume aluminum barrel, an ergonomic handle and the AnyValve head that fits all valves. When ease of use, reliability and size are high on your list, the Mountain Air is an ideal choice.
Carry your CO2 cartridges and inflator on your bike with the Genuine Innovations X-Mount. It easily mounts almost anywhere on your bike and provides you with an easy solution to get you back on the trail quickly. Using the X-Mount means you won't have to worry about cartridges falling out of your jersey pockets!
- Replaces well-used head and fittings and prolongs the life of your trusty floor pump - For 2010 floor pumps
$10.99 - $17.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Angled Presta valve adapter - Designed for disc wheel use
Compact and lightweight, BikeSmart's MasterFlate uses CO2 compressed air cartridges to inflate your tires instantly and without hassle. This inflation head works with Presta valves and takes up almost no space in your seat bag or jersey pocket (C02 cartridges sold separately).
$14.99 - $60.00 $29.99 - $60.00 Up To 50% Savings
Specialized's Air Tool Road Pump boasts an aluminum barrel, handle and shaft for low weight and impressive durability. Thanks to the overlapping, locking handle, it's more compact than many full-size frame pumps. You'll love the long barrel that makes it easy to inflate high-pressure tires. It also boasts a Presta-compatible thumblock head with a tough stainless-steel lever. And, you get a handy mounting bracket as well.
$15.00 - $24.99
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge
The Ultraflate Plus is sleek, compact and uses compressed CO2 to fill tires fast. The thumb lever allows you to control airflow and it has a safety lock to prevent accidental discharge. The Ultraflate Plus comes with a 16-gram non-threaded CO2 cartridge, is compatible with a wide range of other types and sizes, and works with Presta- and Schrader-valve tubes.
$19.99 $24.99 20% Savings
Blackburn's AirStik is a high-pressure, double-action road pump that inflates fast and is also easy to carry on the bike and in a pocket or pack. It fits Schrader and Presta valves and features a fold-out T-handle with rubber grip for easy inflation.
Crank Brothers' Sterling Co2 Inflator makes quick work of getting you back in the saddle. We've all seen CO2 inflators, but it's the details that set the Crank Brother's Sterling apart. Check out the frost guard on the canister and and the push-spring valve for easy air control. It comes complete with two 16g threaded cartridges.
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge
Serfas' AP-01 is perfect for riders who want to skip the hard work. This CO2 inflator fits 12-gram threadless and threaded cartridges as well as 16-gram threaded cartridges for the ultimate in versatility. The trigger mechanism lets you perfectly control the inflation. Plus, it includes a threadless 12-gram cartridge to get you started!
$20.00 - $35.00
The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Patent-pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accomodate all different size mountain tubes
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and a Nanoflator (sold separately) in an easy-access location. And, the Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and a Nanoflator (sold separately) in an easy-access location. And, the X-Nut is compatible with Xlab's Carbon and Super Wings.
- Lightweight aluminum barrel and shaft - Dual-chamber design provides 37% more stroke volume than similar-size pumps - Presta-specific head - Rebuildable internals - Includes cage mount - 58 grams - 160psi max pressure - Available in four colors: black, white, red, and green
$24.99 - $29.99 $29.99 Up To 17% Savings
This rugged floor pump, made with a steel barrel, works on any type of valve so you never have to worry about compatibility. Details: - Sports needles included - Convenient integrated hose keeper on handle - Reinforced plastic base, with molded 'topo map' pattern - 37-inch hose to reach valves in stands or car racks - PSI and Bar increments on gauge, with vibrant color-matched background - 140 PSI, 9.7 Bar maximum
Mini pumps are best suited to be carried in your SWAT bib or jersey pocket, but it must be small enough to leave room for a tube and lever. Lucky for you, small size delivers big performance in this aluminum Air Tool MTB Mini pump that features an integrated tube spool and lever (included) to organize all your off-road tire fixing needs. - All new inverted, double chamber design increases the air handling capacity by 20% compared to our previous design, reducing pumping time by up to two minutes. - Includes an ingenious tube spool to compactly store the tube of your choice without the risk of damage from rubbing against the valve stem. - Integrated locking tab for included SWAT lever.. - Twist locking head reduces size and can be easily converted to fit Presta or Schrader valves. - Machined outer barrel for extra grip while pumping.. - Aluminum inner and outer chamber for durable performance. - Max pressure: 60 PSI (4.1bar) - Volume-per-stroke: 55cc - Tube sold separately
Specialized believes that mini pumps are best suited to be carried in your jersey pocket or saddle bag along with a tube and lever too. Lucky for you, small size delivers big performance in this aluminum road pump that features an integrated tube spool and lever (included) to organize all your road tire fixing needs. - All new, inverted double chamber design increases the air handling capacity by 58% compared to our previous design, reducing pumping time by up to two minutes. - Includes an ingenious tube spool to compactly store road tubes up to 28C without risk of damage from rubbing against the valve stem. - Integrated locking tab for included SWAT lever. - Presta only head keeps size and weight to a minimum, while the dust cover keeps the insides clean. - Machined outer barrel for extra grip while pumping. - All-aluminum inner and outer chamber for durable performance. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 30cc - Tube sold separately
Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! • VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) • STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items • FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. • The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) • The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) • Glass Reinforced Nylon • Chassis weight: 30 grams Includes: • Center Plate • Multi Holder • CO2 Holder • 2 AIR STRIKE CO2 Cartridges • Hardware Popular Clincher Setups (accessory items sold separately) • Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. • 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) • Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. • Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
Page 1 of 2 Next page