Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$1.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.99
- Top lock nut for threaded headsets
- Includes water seal
- Bag of 10 Lock Nuts
$2.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$2.99 - $3.99
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes
- Model: Front
$2.99
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette
- Range: 4mm
- Color: Silver
$3.99
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
$4.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks.
- M12 bolt
$4.99
- Missing links to make chain installation, maintenance and reparation easier
- Reusable up to 3 times
- Compatible with 6, 7 and 8 speed IG drivetrains
- Pin width: 7.1mm
- Card of 2
$4.99
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes
$4.99
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$4.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$5.00
- Cartridge Bearing
- 1-3/8-inch Outer Diameter
$6.99
- Wears and functions like other links on the chain
- SIL-TEC surface treatment
- Tool free installation possible
- TL-CN10 is available as SM-CN900-11
- Single use
$7.50
$10.00
25% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$7.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$7.99
Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.
$7.99
These straps are designed to effectively attach the ATTK IC and TANK storage systems to bikes without the necessary top tube braze-ons. A rubber shroud for cable ties to prevent damage to surfaces and increase grip.
- Soft Rubber strip with a channel to house a cable tie
- Slightly grippy to help prevent slippage
- Can be cut down to fit smaller tubes
Compatibility:
The Frame Protection Strip is designed for cables ties betwen 2mm and 4mm wide. It can be used on any material, anywhere that you would normally use a cable tie.
The Kit Includes:
- 2 x 200mm long Frame Protection Strips
- 2 x 250mm x 3.6mm cable ties
$8.00 - $9.99
• Shim available in various sizes
• For use with 25.4mm or 27.2mm seatposts
$8.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$8.99
• Quick-release seatpost clamp
• Chrome-plated chromoly
• Rubber-covered handle for a great grip
Page 1 of 4
Next page