Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$1.49
- Aluminum w/lock nut - 18mm long/6mm O.D.
$1.99
- Aheadset preload adjusting bolt
$1.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.99
- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts
$1.99
- Replacement cable anchor bolt for brakes - Includes nut and washer
$2.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$2.99 - $3.99
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
$2.99
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver
$2.99 - $4.99
- Chrome allen seat binder bolt
$3.99
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
$4.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
$4.99
- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2
$4.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$4.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$4.99
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$5.00
- Cartridge Bearing - 1-3/8-inch Outer Diameter
$6.99
- Grade 10 chromium steel balls
$6.99
- Grade 10 chromium steel balls
$6.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$7.50 $10.00 25% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$7.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$7.99
Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.
$7.99
These straps are designed to effectively attach the ATTK IC and TANK storage systems to bikes without the necessary top tube braze-ons. A rubber shroud for cable ties to prevent damage to surfaces and increase grip. - Soft Rubber strip with a channel to house a cable tie - Slightly grippy to help prevent slippage - Can be cut down to fit smaller tubes Compatibility: The Frame Protection Strip is designed for cables ties betwen 2mm and 4mm wide. It can be used on any material, anywhere that you would normally use a cable tie. The Kit Includes: - 2 x 200mm long Frame Protection Strips - 2 x 250mm x 3.6mm cable ties
$7.99
• Aluminum clamp with a chromoly bolt
$7.99
- Replacement front cable hanger - Aluminum construction
$7.99
- Universal design double rail saddle clamp
$8.00 - $9.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
$8.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$8.99
• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip
$9.99 - $22.99
- DT Swiss cartridge bearings - Sold in pairs
Page 1 of 4 Next page