Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

Blackburn Plugger Tubeless Repair Replacement Tire Plugs
$4.99
This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.
Blackburn Honest Digital Pressure Gauge
$28.00
Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs
Cannondale PriBar Tire Levers Mini Tool
$15.00
Fix it fast. Light, pocket-sized tire levers with a hybrid construction of an aluminum core encased around a nylon outer are tough but safe for carbon rims. Where it thrives: On the bike, in the garage What it's built for: Fixing, durability Highlights: - Quality, forged aluminum core for strength, perfect for tight fitting tire-and-rim combos - Reinforced nylon outer protects the most valuable rims - Easy tire removal – with integrated spoke hook
Cannondale 10-in-1 Multi-Tool
$25.00
Fix it fast. Fits perfectly in your Scalpel Stash kit or a pocket, and contains ten hand-picked tools that assist in all but the least common bike adjustments. Where it thrives: On the bike, challenging trails, the open road What it's built for: Fixing, durability Highlights: - Contains: Hex Keys 2 | 2.5 | 3 | 4 | 5 | 6 | 8mm | Torx T25 | Phillips #2 | Valve Core Tool - Hardened tools with an anti-corrosive coating and robust aluminum side bars - Compatible with 2021+ Scalpel STASH Kit
Feedback Sports Pedal Wrench Combo
$27.00
A good pedal wrench should be a pretty straightforward tool, and making it beautiful shouldn’t be overlooked – that’s definitely the case with our 15mm pedal and axle nut wrench combination tool. Two unique angled slots provide optimal mechanical advantage for removing even the most challenging pedals. At the opposite end is a precision closed 15mm axle nut tool that’s angled to provide ample clearance away from wheels. Made from forged, hardened and polished CRV tool steel, this is a one-time purchase, guaranteed. Available separate, or find it in our Team Edition and Ride Prep Tool Kits. - Forged, hardened CRV tool steel meant for a lifetime - Two different pedal flat angles for maximum leverage and efficiency - Angled 15mm axle nut wrench provides clearance away from wheels - Polished finish will look good for the life of the tool - Found in our Team Edition and Ride Prep Tool Kits
Feedback Sports Cassette Pliers
$45.00
Feedback Sports Cassette Pliers are so user-friendly, removing your cassette to service bearings, clean your gears or replace a worn drivetrain is so quick you’ll never hesitate to tackle the task. These innovative, self-adjusting pliers confidently grab any cassette cog up to 26T, on any drivetrain from 1-12 speeds (including track cogs). The long-handled, ergonomic grips manage the most challenging cassette removal with precision and confidence. Cold-forged, hardened CRV tool steel arms put these Cassette Pliers in a category all their own. Perfect for learning bike maintenance, or for veteran mechanics. Available separate, or found in our Team Edition Tool Kit. - Secure, non-slip engagement - Self-adjusting from 11T to 26T cogs - Suitable for 1-12 speed Sram, Shimano and Campagnolo drivetrains - Self-adjusting arms make cassette removal fast and easy - Closure lock keeps tool closed and compact when not in use - Cold-forged and hardened CRV tool steel arms prevent flex - Overmolded file tread handles promote control and comfort during challenging work - Found in the Team Edition Tool Kit - Limited Lifetime Warranty
Feedback Sports Chain Keeper
$49.00
Because you love your bikes, when you’re not riding them you’re washing them, tuning them, or traveling to the ultimate ride destination. The Chain Keeper is the perfect solution to keeping your bike chain secure for bike washing, tune-ups and traveling. The elegant CNC machined design fits standard quick-release or 12mm thru-axle dropout systems, no tools required. By keeping chain tension with the Chain Keeper, you can be confident your bike is safe during drivetrain cleaning or travel. - Protects rear derailleur by maintaining chain tension when the rear wheel is removed - Ideal bike service tool for washing, tune-ups and traveling - Accommodates road bikes, cyclocross bikes, mountain bikes, electric bikes, fitness bikes and more - Fits standard 9mm Quick-Release style dropouts - Fits 12mm Thru-Axle dropouts - Prevents the chain from slapping against delicate and painted frame surfaces - High-density Delrin roller is easy on your chain, yet incredibly durable - CNC machined aluminum body is corrosion-resistant and comfortable in-hand - Tool-free, single-hand design makes use simple and effective for beginner or professional bike mechanics
Feedback Sports Range Torque Ratchet
$100.00
The all-new Range Torque Wrench + Ratchet Wrench Combo simplifies proper bike maintenance by combining the precision of a bar-style torque wrench and speed of 2-way ratchet wrench in a compact, lightweight and portable package. There’s no need to set a specific indexed torque, or go searching for missing bits – select your bit from the case’s labeled inserts, ratchet for quick thread engagement and use the torque head to match manufacturer specifications for torque. - Ratchet wrench for speed; torque wrench for precision - Portable and light – fits in a ride pack or travel-transport - Infinite torque capabilities within the 2-10Nm range - 2-way ratchet wrench protects the integrity of torque wrench function - 6-degree ratchet engagement maneuvers in tight spaces - Torque validation for “bolt-checks” on any bicycle components - Compact head and bit design allows clearance and full function in tight spaces - 14 labeled S2 Steel* allen key, torx bit, and Phillips head bits covering the most common bicycle applications - #2 Philips; Torx: T10 , T20, T25, T30; Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm; - Extended length: 5mm Hex & T25 Torx - User ‘zero’ ensures accuracy of the torque bar for every use - 3rd-party tested and validated for accuracy and longevity (exceeds ISO standard) *S2 Steel is industry-leading tool steel for precision edges and durability
Finish Line Easy-Pro Brush Set
$17.99
The Easy-Pro Brush Set includes 5 different brushes that make easy work of all bike-cleaning jobs. Use them to remove mud, dirt and road grime from your frame and components. The package comes with a features-and-benefits guide that explains the multiple uses of each brush. Also included is a chain for hanging the brushes when they're not in use.
Finish Line Starter Kit 1-2-3
$19.99
Regular chain and component cleaning is a chore no more with Finish Line's Starter Kit 1-2-3. It starts with Finish Line's popular Multi Degreaser for cleaning, and their versatile Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too. Then, after cleaning, get your bike running smoothly and silently again with the included Finish Line Dry Teflon lube and you're good to go!
Finish Line Grease Injection Gun
$21.99
This ergonomically designed grease gun delivers comfortable precision lubing. With one-hand operation and a long-reach tip, it's an easy, clean, quick way to get the slippery stuff where you want it. It screws onto all standard tubes of grease with 9/16-inch heads (sold separately).
Finish Line Shop Quality Chain Cleaner Kit
$34.99
Finish Line's Shop Quality Chain Cleaner Kit is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning. Your hands stay clean, too! Plus, its rugged plastic construction is virtually unbreakable and the kit comes complete with a 4-ounce bottle of EcoTech Degreaser concentrate and a 2-ounce bottle of Dry lube. Use it for a cleaner and smoother-shifting chain.
Hozan Fourth-Hand Cable Puller/Pliers
$29.90
- Highly rated tool for tensioning a cable while pinch bolt is tightened
Kool-Stop Tire Bead Jack
$14.99
The Kool-Stop Tire Bead Jack is an articulated tool, with a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing with difficult tires.
Park Tool Replacement Chain Tool Pin
$3.99 - $4.99
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
Park Tool Tire Lever Set (Set of 3)
$4.95
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
Park Tool Gear Clean Brush
$5.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park Tool Double-Ended Cone Wrench
$7.95
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Park Tool Cassette Lockring Tool
$8.95
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
Park Tool Freewheel Remover
$8.95
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
Park Tool Cassette Lockring Tool with 5mm Guide Pin
$9.95
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
Park Tool Folding Hex Wrench Set
$9.95
Park's Hex Wrench Set includes the most-needed Allens (4, 5 and 6mm), plus a Phillips and flathead screwdriver, all in one convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Park Tool Hex Tool
$9.95 - $14.95
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
Park Tool Stainless Steel Pint Glass
$9.95
All metal cup made of 304 Stainless Steel.
Park Tool Folding Hex Wrench Set (1.5-6mm)
$10.95
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Park Tool Triple Spoke Wrench
$10.95
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
Park Tool Chain-Wear Indicator
$11.95
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
Park Tool Fold-Up Hex Wrench Set
$11.95
The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.
Park Tool SPA-1 Pin Spanner
$11.95
Park's Pin Spanners are designed for maximum usefulness and versatility at the best value. Tough high-carbon tool steel is used to ensure long life and the handles are vinyl coated for a great grip and color-coded for easy identification. The green-handled SPA-1 is used to turn the adjustable bottom-bracket cup found on most 3-piece cranksets.
Park Tool AWS-1 3-Way Hex Wrench - 4mm/5mm/6mm
$13.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
Page 1 of 4 Next page