Profile Design's Aerodrink Base Bar Bracket is the perfect holder for your Profile Aerodrink bottle. It weighs next to nothing and is built tough to firmly hold bottles and last for years of training and racing. It attaches quickly and easily to all Profile, and most other base handlebars (base bars and bottles sold separately).
Profile's Aerodrink Bracket mounts to aerobars to hold Profile's Aerodrink bottle (sold separately), so you can drink while in the aero position. It adjusts up to 140mm wide to fit most bars and is secured with Velcro straps (not shown) for simple installation and removal.
Somewhere between the excitement of competition and recovery, it can be easy to misplace things. With Profile's Aerodrink Parts Kit you can replace both straws, the mesh sponge and the two rubber bands that keep your Aerodrink ready for your next event.
With Profile's Aqua Cell, your favorite drinks are just a straw sip away! This durable, injection-molded system features two chambers so you can optimize your hydration with multiple drinks. The main chamber holds 35 ounces and the secondary chamber holds 15 ounces. And, the top caps open easily for on-the-go refills. The Aqua Cell also slips easily into Profile's Airstryke and Century aero bars (sold separately).
This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension
Stay aero and stay hydrated with Profile's Aqualite! Featuring an easy-to-refill, no-splash cap, this durable, injection-molded 22-ounce bottle includes an extended straw for easy access. And, the Aqualite fits both wide and narrow-mounted aerobars easily with Profile's Aerodrink bracket (sold separately).
The B-Tab is a low-profile horizontally-mounted BTA (between the arms) system. It features the versatile Side Axis Kage which allows riders to choose either a left or right side bottle release. The system can support both standard water bottles and the Aero HC. Alternatively, the system can be rotated to mount a standard bottle vertically. A hinged bracket design allows for quick and easy install and removal. - Can be rotated to mount vertically - Compatible with 31.8mm basebar - Offset design provides fore/aft adjustment - Hinged bracket design for quick installation and removal - 10mm wide bracket
$99.99 - $109.99
Profile Design's FC25 and FC35 Hydration systems create clean, uncluttered airflow across the front of your bike. They seamlessly integrate hydration and nutritional needs along with your computer or GPS. A dual straw positioning system lets you place the straw on either the right or left, and you can swap the position of the straw and cap to place the straw at the front or rear of the bottle. Profile Design thought of everything!
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
The HSF BTA offers improved positioning versatility, better retention, and the ability to mount a Garmin computer above the bottle. The HSF BTA takes a minimalist approach to providing the maximum versatility for a between the arms bottle mount. The low weight, high retention, setback mount point, and integrated computer mount give everything you need and nothing you don't. The mount is offset so that the center point of the bottle bolts can sit well behind the attachment point. This allows the cage/bottle to be set further back on aerobars that would otherwise force the bottle forward to the point where it is inaccessible. The mount has a slightly dropped 'V' shape to help center it between the extensions and reduce the risk of the bottle interfering with narrow armrest positions. It also accommodates a greater range of extension widths than the previous models. - Construction: Injected nylon/glass fiber construction - Compatibility: HSF Bottle or use with Standard Cycling Water Bottle - Computer Compatibility: Garmin: Mount is optional and can be removed. (Wahoo: Adapters available via 3rd party purchase). - Mount offset: 30mm - Mount drop: 10mm - Extension Width Requirement: 80mm - 120mm (center - center) - Weight: 100g
Profile Design's RM-L system provides a sleek and aerodynamic way to address your on-the-bike hydration needs. The strong metal bracket attaches quickly and easily to your saddle rails. It has spots for up to three bottle cages of your choice. It even includes two lightweight Profile Design Kages to get you started. Placing your bottles behind the saddle creates a cleaner aerodynamic profile for your bike, resulting in time and energy savings over the course of your next Tri.
Rear mount hydration system mounts to standard 7mm saddle rails and sits flush to rear of saddle. Featuring an innovative elliptical arch clamp for tilt adjustability. Carries 1 or 2 water bottle. - Patent pending arch clamp provides 14 degrees of adjustment - Material: Precision machined and stamped 6061-T6 aluminum - Cage Material: Injected Nylon/Glass Fiber (Vise Cage) - Capacity: 1 or 2 cage compatible - Cage: Vise - Weight: 200G - Includes 2 lightweight Profile Design Vise Cages
Page 1 of 1